To correct a yellow flame-Increase size of air shutter opening.With LP gas, some yellow tipping on outer cones is normalī Oven burner flame can be checked as follows (without burner baffle in place): Normal burner flames should look like (B) or (C), depending on the type of gas you use. If burner flames look like (A), further adjustment is required. (C) Soft blue flames: Normal for natural gas (B) Yellow tips on outer cones: Normal for LP gas (A) Yellow flames: Further adjustment required The combustion quality of burner flames needs to be determined visually. Some yellow tipping may be normal for LP gas.Ī Loosen the lock screw located at the top of the air shutter, then rotate the air shutter to the correct setting and retighten screw. If lifting is observed, gradually reduce the air shutter opening until flames are stabilized. After 30 seconds of burner operation, check for flames lifting off the burner ports. The flame should have approximately 1-inch blue cones. 8 ADJUST THE OVEN BURNER AIR SHUTTER IF NECESSARY (CONT.)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |